|
HTML rendering created 2025-09-06 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | COMMANDS | OPTIONS | EXAMPLES | SEE ALSO | NOTES | COLOPHON |
|
|
|
VARLINKCTL(1) varlinkctl VARLINKCTL(1)
varlinkctl - Introspect with and invoke Varlink services
varlinkctl [OPTIONS...] info ADDRESS
varlinkctl [OPTIONS...] list-interfaces ADDRESS
varlinkctl [OPTIONS...] list-methods ADDRESS [INTERFACE...]
varlinkctl [OPTIONS...] introspect ADDRESS [INTERFACE...]
varlinkctl [OPTIONS...] call ADDRESS METHOD [ARGUMENTS]
varlinkctl [OPTIONS...] --exec call call ADDRESS METHOD ARGUMENTS
-- CMDLINE
varlinkctl [OPTIONS...] validate-idl [FILE]
varlinkctl may be used to introspect and invoke Varlink[1]
services.
Services are referenced by one of the following:
• A Varlink service reference starting with the "unix:" string,
followed by an absolute AF_UNIX socket path, or by "@" and an
arbitrary string (the latter for referencing sockets in the
abstract namespace). In this case, a stream socket connection
is made to the specified socket.
• A Varlink service reference starting with the "exec:" string,
followed by an absolute path of a binary to execute. In this
case, the specified process is forked off locally, with a
connected stream socket passed in.
• A Varlink service reference starting with the "ssh-unix:"
string, followed by an SSH host specification, followed by
":", followed by an absolute AF_UNIX socket path. (This
requires OpenSSH 9.4 or newer on the server side, and abstract
namespace sockets are not supported.)
• A Varlink service reference starting with the "ssh-exec:"
string, followed by an SSH host specification, followed by
":", followed by a command line. In this case, the command is
invoked and the Varlink protocol is spoken on the standard
input and output of the invoked command.
For convenience, these two simpler (redundant) service address
syntaxes are also supported:
• A file system path to an AF_UNIX socket, either absolute (i.e.
begins with "/") or relative (in which case it must begin with
"./").
• A file system path to an executable, either absolute or
relative (as above, must begin with "/" or "./",
respectively).
The following commands are understood:
info ADDRESS
Shows brief information about the specified service, including
vendor name and list of implemented interfaces. Expects a
service address in one of the formats described above.
Added in version 255.
list-interfaces ADDRESS
Shows a list of interfaces implemented by the specified
service. Expects a service address in one of the formats
described above.
Added in version 255.
list-methods ADDRESS [INTERFACE...]
Shows a list of methods implemented by the specified service.
Expects a service address in one of the formats described
above as well as one or more interface names. If no interface
name is specified, lists all methods of all interfaces
implemented by the service, otherwise just the methods in the
specified interfaces.
Added in version 257.
introspect ADDRESS [INTERFACE...]
Shows the interface definitions of the specified interfaces
provided by the specified service. Expects a service address
in one of the formats described above and optionally one or
more Varlink interface names. If no interface names are
specified, shows all provided interfaces by the service.
Added in version 255.
call ADDRESS METHOD [ARGUMENTS]
Calls the specified method of the specified service. Expects a
service address in the format described above, a fully
qualified Varlink method name, and a JSON arguments object. If
the arguments object is not specified, it is read from STDIN
instead. To pass an empty list of parameters, specify the
empty object "{}".
The reply parameters are written as JSON objects to STDOUT.
Added in version 255.
validate-idl [FILE]
Reads a Varlink interface definition file, parses and
validates it, then outputs it with syntax highlighting. This
checks for syntax and internal consistency of the interface.
Expects a file name to read the interface definition from. If
omitted, reads the interface definition from STDIN.
Added in version 255.
help
Shows command syntax help.
Added in version 255.
The following options are understood:
--more
When used with call: expect multiple method replies. If this
flag is set, the method call is sent with the more flag set,
which tells the service to generate multiple replies, if
needed. The command remains running until the service sends a
reply message that indicates it is the last in the series (or
if the configured timeout is reached, see below). This flag
should be set only for method calls that support this
mechanism.
If this mode is enabled, output is automatically switched to
JSON-SEQ mode, so that individual reply objects can be easily
discerned.
This switch has no effect on the method call timeout applied
by default. Regardless of whether --more is specified or not,
the default timeout will be 45s. Use --timeout= (see below) to
change or disable the timeout. When invoking a method call
that continuously returns updates, it is typically desirable
to disable the timeout with --timeout=infinity. On the other
hand, when invoking a --more method call for the purpose of
enumerating objects (which likely will complete quickly), it
is typically beneficial to leave the timeout logic enabled,
for robustness reasons.
Added in version 255.
-E
A shortcut for --more --timeout=infinity. This switch is
useful for method calls that implement subscription to a
continuous stream of updates.
Added in version 257.
--collect
This is similar to --more, but collects all responses in a
JSON array, and prints it, rather than in JSON-SEQ mode.
Added in version 256.
--oneway
When used with call: do not expect a method reply. If this
flag is set, the method call is sent with the oneway flag set
(the command exits immediately after), which tells the service
not to generate a reply.
Added in version 255.
--json=MODE
Selects the JSON output formatting, either "pretty" for nicely
indented, colorized output, or "short" for terse output with
minimal whitespace and no newlines. Defaults to "short".
Added in version 255.
-j
Equivalent to --json=pretty when invoked interactively from a
terminal. Otherwise, it is equivalent to --json=short, in
particular when the output is piped to some other program.
Added in version 255.
--quiet, -q
Suppress output of method call replies.
Added in version 257.
--graceful=
Takes a qualified Varlink error name, i.e. an interface name,
suffixed by an error name, separated by a dot, e.g.
"org.varlink.service.InvalidParameter". Ensures that, if a
method call fails with the specified error, this will be
treated as success, i.e. will cause the varlinkctl invocation
to exit with a zero exit status. This option may be used more
than once in order to treat multiple different errors as
successes.
Added in version 257.
--timeout=
Expects a timeout in seconds as parameter. By default, a
timeout of 45s is enforced. To turn off the timeout, specify
"infinity" or an empty string.
Added in version 257.
--exec
Once the method call issued via call completed successfully,
chainload the specified command line, with the method call
output parameters serialized to JSON passed into standard
input (and standard output and standard error inherited from
the invoking process). Moreover any file descriptors passed
back on the underlying communication socket are passed to the
invoked process via the usual $LISTEN_FDS protocol. This
functionality may be used to consume replies that come with
associated file descriptors in a reasonable way.
Now that if --exec is specified the the third parameter to
call is not optional (i.e. the method call parameters).
Added in version 258.
--push-fd=
Takes a numeric file descriptor number as parameter. May be
used to pass a file descriptor along with the method call, if
the underlying transport supports this. May be used multiple
times to pass multiple file descriptors, retaining the order
in which they are specified. The specified file descriptors
must be passed to the varlinkctl invocation. Optionally, in
place of a numeric file descriptor number an absolute or
relative file system path (the latter must be prefixed with
"./") may be specified, which is opened in read-only mode.
Added in version 258.
--no-pager
Do not pipe output into a pager.
-h, --help
Print a short help text and exit.
--version
Print a short version string and exit.
Example 1. Investigating a Service
The following three commands inspect the "io.systemd.Resolve"
service implemented by systemd-resolved.service(8), listing
general service information and implemented interfaces, and then
displaying the interface definition of its primary interface:
$ varlinkctl info /run/systemd/resolve/io.systemd.Resolve
Vendor: The systemd Project
Product: systemd (systemd-resolved)
Version: 254 (254-1522-g4790521^)
URL: https://systemd.io/
Interfaces: io.systemd
io.systemd.Resolve
org.varlink.service
$ varlinkctl list-interfaces /run/systemd/resolve/io.systemd.Resolve
io.systemd
io.systemd.Resolve
org.varlink.service
$ varlinkctl introspect /run/systemd/resolve/io.systemd.Resolve io.systemd.Resolve
interface io.systemd.Resolve
type ResolvedAddress(
ifindex: ?int,
...
(Interface definition has been truncated in the example above, in
the interest of brevity.)
Example 2. Invoking a Method
The following command resolves a hostname via
systemd-resolved.service(8)'s ResolveHostname method call.
$ varlinkctl call /run/systemd/resolve/io.systemd.Resolve io.systemd.Resolve.ResolveHostname '{"name":"systemd.io","family":2}' -j
{
"addresses" : [
{
"ifindex" : 2,
"family" : 2,
"address" : [
185,
199,
111,
153
]
}
],
"name" : "systemd.io",
"flags" : 1048577
}
Example 3. Investigating a Service Executable
The following command inspects the
/usr/lib/systemd/systemd-pcrextend executable and the IPC APIs it
provides. It then invokes a method on it:
# varlinkctl info /usr/lib/systemd/systemd-pcrextend
Vendor: The systemd Project
Product: systemd (systemd-pcrextend)
Version: 254 (254-1536-g97734fb)
URL: https://systemd.io/
Interfaces: io.systemd
io.systemd.PCRExtend
org.varlink.service
# varlinkctl introspect /usr/lib/systemd/systemd-pcrextend io.systemd.PCRExtend
interface io.systemd.PCRExtend
method Extend(
pcr: int,
text: ?string,
data: ?string
) -> ()
# varlinkctl call /usr/lib/systemd/systemd-pcrextend io.systemd.PCRExtend.Extend '{"pcr":15,"text":"foobar"}'
{}
Example 4. Invoking a method remotely via SSH
The following command acquires a report about the identity of a
remote host "somehost" from systemd-hostnamed.service(8) by
connecting via SSH to the AF_UNIX socket the service listens on:
# varlinkctl call ssh-unix:somehost:/run/systemd/io.systemd.Hostname io.systemd.Hostname.Describe '{}'
To invoke a Varlink service binary directly on the remote host,
rather than talking to a service via AF_UNIX can be done like
this:
# varlinkctl call ssh-exec:somehost:systemd-creds org.varlink.service.GetInfo '{}'
busctl(1), Varlink[1]
1. Varlink
https://varlink.org/
This page is part of the systemd (systemd system and service
manager) project. Information about the project can be found at
⟨http://www.freedesktop.org/wiki/Software/systemd⟩. If you have a
bug report for this manual page, see
⟨http://www.freedesktop.org/wiki/Software/systemd/#bugreports⟩.
This page was obtained from the project's upstream Git repository
⟨https://github.com/systemd/systemd.git⟩ on 2025-08-11. (At that
time, the date of the most recent commit that was found in the
repository was 2025-08-11.) If you discover any rendering
problems in this HTML version of the page, or you believe there is
a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
systemd 258~rc2 VARLINKCTL(1)
Pages that refer to this page: busctl(1), sd-varlink(3), systemd.directives(7), systemd.index(7)
|
HTML rendering created 2025-09-06 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|